Skip to main content

Custom solar panels

To add a custom panel in Easy PV navigate to My Components > Solar Panels on the left-side menu or Components > Edit Solar Panels from the top drop down menu. 

You will need the data sheetdatasheet from the manufacturer so Easy PV can appropriately perform calculations for inverter sizing and system output. Below you will find guidance on how the information in the datasheet corresponds to the values Easy PV asks for. 

Creating manufacturer 

When adding any custom panel in Easy PV you first need to add a custom manufacturer category which allows you to organise your custom components. The components added will be categorised by their manufacturer when it comes to select them in a project.

image.png

Inputting information from datasheet 

After inputting the name for the manufacturer, re-open your custom manufacturer and you will see additional options to add a solar panel. 

image.png

You will then need to input the technical information found in the datasheet for the panel. This is a list of potential variations for each value required to add a custom panel:

Technical info

Variations

Power: power of the panel at STC in Watts

  • Peak Power Watts

  • Maximum Power Pmax

  • Power at MPP

Isc: short circuit current of the panel at STC in A

  • Short Circuit Current

  • Short Circuit Current Isc

Impp: maximum power point current of the panel at STC in A

  • Maximum Power Current

  • Current at MPP

ΔIsc/°C: the temperature coefficient of the panel short circuit current

  • Temperature Coefficient of Isc

Voc: open circuit voltage of the panel at STC

  • Open Circuit Voltage

Vmpp: maximum power point voltage of the panel at STC

  • Maximum Power Voltage

  • Voltage at MPP

ΔVoc/°C: temperature coefficient of the open circuit voltage of the panel

  • Temperature Coefficient of Voc

The panel will auto-save once all the required fields are completed. Once you have added a panel successfully - you’ll be able to select it in the list of panels when creating a new project. 

Additional details 

  • The photo and description for the panels will show up on your final customer proposal, to edit the image of the custom manufacturer or component, click on the default image and upload from your files.
  • There is a set of rules which you can select or deselect as you need, these are the default settings for new panels: image.png
Back to top