Skip to main content

DNO Application via Connect Direct

Easy PV Pro’s DNO application feature allows you to effortlessly create and submit a DNO application directly based on your Easy PV design. It will take information from your project to pre-populate some of the fields in a specially designed online form. 

It is possible to begin the DNO application form once you have completed the design stage of your project and you have a bill of materials. At the Project Overview screen select Start on the DNO Application box on the right-hand side.

This will take you to the following screen.

Firstly you need to fill in the customer’s unique MPAN number. This is a 21-digit number beginning with the letter 'S’ that is used to identify an electricity supply. Once this is filled in, Easy PV will add the correct DNO for that address (this can also be added manually).

Your customer’s name, address, and contact details along with your own details will be pre-populated here (provided you have inputted this data earlier in the design phase). These can also be edited or added here if required.

Easy PV will also have pre-filled the device type and unique reference number for the component that has been used in your design.

At this point, you need to choose an Installation Date. This date must be in the future, Easy PV will not accept a date in the past.

It is then possible to input details of any devices that may already be installed at the customer’s property, for example, an existing AC charger.

For the last section ‘Supply Details’, all of these fields will need to be filled in by you as the user. You need to upload a clear image of the ‘cut-out’ of the electrical supply for the property, something like the image shown here. This image will then be verified and checked so it will need to be accurate.

You are able to view the status of your application from the project overview screen and refresh to check back for updates.

Back to top