Skip to main content

Electrical task

This is the final stage of the kit builder and is where you specify isolators, cables, meters and any other kit needed in the system. 

In order to complete this task, you will need to have completed the panels and inverter task. After you have done so, much of this task will be completed for you. 

DC Isolators

Choose a DC isolator for each inverter input. 

  • Click on the Current and Voltage sections to view full details. 
  • Use Match all DC isolators... button to bulk edit DC isolators for that inverter. 

simplescreenrecorder-2026-02-11_14.56.57-ezgif.com-video-to-gif-converter.gif

DC cable and connectors

Specify the length of run and cable cross section of the DC cable to check voltage drop.

simplescreenrecorder-2026-02-11_15.01.19-ezgif.com-video-to-gif-converter.gif

Solshare

SolShare enables multiple flats to be connected to a single PV system. SolShare outputs to up to 15 single phase connections, 5 three-phase connections (or a combination of both).

Select which inverters you wish to be paired with SolShare and how many connections the SolShare will be supplying.

AC Isolators

Specify an appropriate AC isolator for each inverter in your project, and check that it has an appropriate current rating.

Meter

Select a generation meter and check that it is rated to the maximum current expected from the system.

Extras

Add monitoring, immersion controllers, battery storage and accessories to your project.

Back to top