Buildings and roofs Choosing a design mode When you first create a project you will get the choice of the which design mode you would like to use. The design mode affects how you model the roofs you plan to put panels on.  ​ Demo Watch the same property be designed in each design mode to see each of them in action. Design modes In Easy PV there are four options: 3D Create 3D property model by designing the roof from a satellite image and dimensions Model obstructions and nearby buildings or trees that may cast shade on the roofs you're working on to get automatic shade analysis and improve the accuracy of the performance calculations Automatically calculate scaffolding costs if using automatic pricing calculator ​ Learn more :  Intro to 3D design mode Irregular buildings in 3D mode Join our 3D designing training session Magic  Create an automatic 3D design - works out the height and pitch of buildings and identifies any obstructions Three free magic designs per day for standard users and unlimited for pro Will require some adjustments for accuracy Roof outline  Create roof model by outlining the roof from a satellite image and adjust the dimensions in the roofs task 2D model so requires manual sunpath diagrams Quick Roof  Create 2D roof using dimensions, pitch, orientation and tile type, can also spec ground mount systems  Does not use satellite imagery so a good option if the satellite imagery isn't usable ​ Learn more: Intro to Quick Roof .  ​ Want to know more? Live training:   Book onto a live demo session Related FAQs: Check out our Buildings and Roofs FAQs Contact Support:  If you've got further questions, get in touch with our support team at  help@easy-pv.co.uk  (UK) or  help@easy-pv.ie  (IE).  If you are experiencing a bug, to help us look into your issue faster, please include the email address of your account, the name of the project and screenshots of any unexpected behaviour. Introduction to 3D design mode 3D design mode allows you to take into account nearby buildings or trees that may cast shade on the roofs you're working on. Easy PV can then automatically model the shade on the roof, saving you time and leading to more accurate projections for your customer.  Starting a 3D project When creating your project, select the "3D" option. Since 3D mode relies on the satellite map, you must then set the map either by zooming into the right location and selecting  Set from map  or inputting the address and clicking  Set from address . You can then click Create and start your 3D design. ​ Watch 3D design in action:  Quick demo of a 3D design Walk-through examples using the irregular building tool Join our dedicated 3D design training session for more live examples ​ Overview of 3D design There are three views you can use to complete your design in 3D: Plan : This is a top down satellite view of the property Drag and drop buildings and obstructions from the left-side menu and align with the satellite map Click in the corners to view and edit dimensions   Note : all dimensions in the plan view are all top-down . Use elevations view for pitched dimensions.  Where available this will load with a property boundary. Only roofs within this boundary will be usable in the project 3D : 3D view of the model Useful to check elevations are correct Expand 3D view to view full shading model Elevations : View of heights and pitched dimensions Click on a building, extension or obstruction in the plan view to display heights and pitched dimensions Adjust dimensions by dragging or input directly by clicking on value Choosing satellite map: orthorectified and standard imagery When designing atop the satellite map, you have two choices of which map data to use:  Orthorectified : This uses geometrically corrected satellite data to give more accurate dimensions. This will not always be available Standard : This uses raw satellite data. Dimensions may be distorted, particularly for sloped structures If you are relying on the satellite map for dimensions, then orthorectified is the recommended option . We cannot guarantee the accuracy of the dimensions when using the standard imagery.  ​ Selecting roofs to use  Once you have completed your design, click  Next . A menu will then pop up showing the roofs. Easy PV will automatically select the roofs it thinks are most suitable based on the size, pitch and orientation If a property boundary is included, only roofs within this property boundary will display - remove or edit the property boundary if roofs you modelled are missing Select or de-select and roofs using the checkbox on the right Place cursor over roofs to highlight them in the map on the left Once all the roofs you want to place panels on are selected, click Next in the bottom right to go to the Panels task .  Automatic shade analysis  One of the key benefits of designing in 3D is Easy PV will calculate the shading on the panels automatically. In order to make the most out of this feature, it's therefore important to model any surrounding buildings or obstructions that would cast shade on the panels. Drag and drop obstructions from the Misc. section, adjusting any heights in the elevations view:  Performance task On all 3D projects, you will have the additional option in the Performance task to automatically calculate sunpath diagrams:  When this is selected, the shading factor/losses will be calculated for you. If you would like the shading to be calculated automatically each time, make sure this option is selected in your (pro) account performance settings : Note: that when using optimisers shading is not calculated per panel but per shading group . Read more about that  here .  3D model  You can use the 3D model to check the shading on the roof. From the tasks drop-down, select 3D model:  In the top left you will see the date and time currently being modelled and a slider to adjust how quickly time passes.  If you click the pause icon , this diagram will appear in the bottom left. Drag the sun across the dates and times to see the shading at specific times.  ​ Still Need Help? Related FAQs:  Check out our  Buildings and Roofs FAQs for answers to common questions Live training:   Book onto a live demo session to see this feature in action Contact Support:  If you've got further questions, get in touch with our support team at  help@easy-pv.co.uk  (UK) or  help@easy-pv.ie  (IE).  If you are experiencing a bug, to help us look into your issue faster, please include the email address of your account, the name of the project and screenshots of any unexpected behaviour. Irregular Buildings in 3D design mode T he irregular building tool allows you to create unusual roof shapes that cannot be modelled using the standard roof options.  Using irregular building tool  The irregular building tool can be found at the bottom of the Misc. section on the 3D left side-bar.  When creating a roof using the irregular building tool, there are a variety of additional handles you can use to accurately adjust the shape of the roof:  1. Pink corner handles Click the pink corner handles to show dimensions of the associated roof sides. You can then click on the values to manually change these. Click on the pink corner handles to use the following options:   Square corner handle: Use to resize the roof whilst keeping the adjacent sides at the same angle   Circle corner handle: Use to move that point independently of the other points to create angled sides   Delete: Delete the corner. This option is only available if there are 4 or more corners on a roof ​ See Example 1 . 2. Blue circle handles Click and drag the  blue circle handles to allow you to split a side and create irregular shapes. These will then convert to pink handles which you can delete if needed. ​ See Example 2 . 3. Pink rectangular handles Use the rectangular handle to resize the roof. Click on the  pink rectangular handles to toggle between a square and curved cornered handles:  Square cornered handle:  Use to extend a roof side out Curved cornered handle: Use to extend the adjoining rood side independently of the others. This will create new corners and sides which can be deleted by clicking on the corners and then the bin icon ​ See Example 1 and Example 2 . 4. Blue dot  Drag the blue dot below the yellow rotation icon to indicate the direction that the panels will face. Whichever direction the arrow is facing is the panel and roof pitch direction.  ​ See Example 1 . ​ Examples See below for some examples that demonstrate using the irregular building tool on actual roofs.  Example 1 Example 2 ​ Still Need Help? Related FAQs:  Check out our  Buildings and Roofs FAQs for answers to common questions Live training:   Book onto a live 3D training session to request help with specific challenging properties Contact Support:  If you've got further questions, get in touch with our support team at  help@easy-pv.co.uk  (UK) or  help@easy-pv.ie  (IE).  If you are experiencing a bug, to help us look into your issue faster, please include the email address of your account, the name of the project and screenshots of any unexpected behaviour. Introduction to Quick Roof design mode With Easy PV's Quick Roof design mode you can model a roof without using satellite imagery, making it a good option if the satellite data isn't available. Simply model the roof using the dimensions, pitch and roof covering and add any obstructions.  Creating a Quick Roof design Quick Roof is selected when you first create a project, input project details and under  Design Mode select Quick Roof . Then click Create in the bottom right.  This will then take you to the Roof task where you can model the roof.  Roof task overview  In the Roof task you can create and edit your 2D roof model: In the Roof Manager in the bottom right, clicking the ⋯ three dots on the individual roofs will show the following options:   Edit details: Edit the roof type and dimensions   Clone roof: Copy the roof. This option will prompt you to input the name for the clone   Delete: Delete the roof from the project. This cannot be undone Creating roof model Initial roof details  When you first open a Quick Roof project, you will be prompted to fill in some initial roof details: Select the roof type and roof covering : this determines what mounting options are available to select Input roof dimensions : width, height, pitch and orientation Orientation is taken in degrees from south going clockwise. Read more about setting the right orientation .  These details can be adjusted by clicking the ⋯ three dots  in the Roof Manager and selecting Edit Details . The dimensions can also be adjusted directly from the model by clicking on the corners and inputting the length.  Adjusting roof shape  When creating a roof in the Roof task, there are a variety of different handles you can use to accurately adjust the shape: 1. White corner handles Click the  white corner handles to show dimensions of the associated roof sides. You can then click on the values to manually change these. Click on the white corner handles to view the following options:   Square corner handle:  Use to resize the roof whilst keeping the adjacent sides at the  same angle   Circle corner handle:  Use to move that point  independently  of the other points to create angled sides.    Delete:  Delete the corner. This option is only available if there are 4 or more corners on a roof 2. Yellow circle handles  Click and drag the  yellow circle handles to allow you to split a roof edge and create irregular shapes. These will then convert to white handles which you can delete if needed. ​ Read more about the snapping guide (transparent rectangle) used here in the next section . 3. White rectangular handles Click on the white rectangular handles to toggle between a square and curved cornered handles:  Square cornered handle:  Use to extend a roof side out  Curved cornered handle:  Use to extend the adjoining rood side independently of the others. This will create new corners and sides which can be deleted by clicking on the corners and then the bin icon Adding obstructions  Once you have your overall roof shape, you can add obstructions. Including obstructions will help when planning where to place panels in the Panels task.  Drag and drop any obstructions and use the snapping guide to ensure the obstruction positioning is correct.  Snapping guide   The  snapping guide is a rectangle guide that you can set the dimensions of to help position obstructions correctly on a roof and to size your roof. Obstructions and roof sides will align with the sides and corners of the snapping guide. Here is an example of using the snapping guide to position a roof light. Use the same white handles described above to resize the snapping guide and obstructions. If you are modelling an irregularly shaped obstruction, you can use the polygon obstruction. This uses the same white and yellow handles as the roof. You can also use the snapping guide to ensure the dimensions are correct when creating irregular shapes.    ​ Still Need Help? Related FAQs: Check out our buildings and roofs FAQs   for answers to common questions More guides : Take a look at a property being designed in each Easy PV design mode Contact Support:  If you've got further questions, get in touch with our support team at  help@easy-pv.co.uk  (UK) or  help@easy-pv.ie  (IE).  If you are experiencing a bug, to help us look into your issue faster, please include the email address of your account, the name of the project and screenshots of any unexpected behaviour.